Switch settings (regular switch)

This instruction assumes that devices are already connected to the controller according to the instructionUniversal light switch in the Smart Home system


Go to the controller settings

To configure the input ports, you must first go to the controller settings:
● Go to Menu - Device Manager● Select the desired controller from the list and click Setup



Configure input ports

● Select the Ports and interfaces item and go to the IN 1-9 tab● On the input ports tab IN1- .. controller’s inputs are shown as separate cards


Note: The input numbers on the cards are the same as the physical inputs on the front of the controller.


Select the type of peripheral device

● Select the Input you want to configure● In the input settings window, select "What is connected?"● From the list of available devices, select the Switch


Important: The list of peripherals that can be connected to this input port will depend on the type of port.


Configure the switch

● Select the Advanced settings icon, here you can specify the value:- Invert - change the signal polarity (off by default)
● Save the settings by clicking on the icon and return to the settings window of the selected input port


Note: Advanced settings always contain default data. Changing the values in the advanced settings is an optional step if necessary.


Choosing a room

● In the field "Where the device is located" you can specify the location of the switch● If you need to add a new room, click on the "+" icon located in the upper right corner of the screen, assign a name to the new room, set its type and click on the Save icon 


Note: If you leave this field blank, the location of the peripheral device will be displayed as "not specified", and the Dashboard window will indicate that it is located in the room "----------".


Name of the switch

● Return to the Settings window of the selected input port● In the Name field, for convenience, you should specify the name of the switch by which you can uniquely identify it● Click the Save icon


Note: If the device name is not specified, the system will assign the default name to the switch.


Adjust the display of the switch tile on the Dashboard

● By default, the Switch is not displayed on the Dashboard● If necessary, this can be changed in the Dashboard display settings (enable the Buttons group)


The result of the described steps:

● The Switch was created with a name that was specified by the user. You can see it as one of the devices in the Rooms section, in the room you specified during setup.● You can also select this button in the section With what to control when creating or editing automations.

Didn’t find the answer to your question?

You can contact the technical support chatbot.Found a mistake on the site? Help us fix it!